RK3568 mobile POS for warehouse Standard for Nigeria Buyers - Wholesale Delivery Logistics and Wareh

Wanlin Group (Shenzhen, China) confirmed on September 29, 2026 that Nigeria payment device makers and acquiring integrators can order the RK3568-DL120 at factory terms, Rockchip RK3568 quad-core SoC, 8GB LPDDR4X + 16GB eMMC, 5.5-inch MIPI DSI touch, Android 14.0 with OTA upgrade, 4G LTE with GPS and BeiDou positioning for delivery and field service routes, under the 2026 Delivery Logistics and Warehouse Handheld Terminal Boards program: 8GB LPDDR4X + 16GB eMMC, with handheld terminals for couriers, warehouse pickers and cold chain drivers that scan parcels, take cash or card on delivery, print waybills and labels, capture proof of delivery and report position back to the dispatch system over 4G and WiFi, built for the way Nigeria merchants and field teams actually work. Wanlin Group as the handheld POS board supplier, exporter and original manufacturer now serves local partners, regional exclusive distributors and strategic OEM clients in more than 60 destination markets, and this export program is open to Nigeria buyers ordering at factory-direct terms.

Core parameters: Rockchip RK3568 quad-core SoC, 4x Cortex-A55 with an integrated NPU. CPU 4x ARM Cortex-A55 up to 2.0GHz, 64-bit architecture. GPU ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1. Render and security path Mali-G52 2EE render path with the on-chip NPU handling QR decoding assist, face detection and OCR work. Video decode Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for audit capture. Camera input MIPI CSI camera input for face payment cameras, barcode imagers and document capture. Memory and storage 8GB LPDDR4X + 16GB eMMC. Operating system Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher. Display and touch 5.5-inch 720x1440 MIPI DSI panel with capacitive multi-touch and glove-mode tuning. Audio and signalling Speaker with voice broadcast of amount and payment result in the selected language. Interfaces and I/O 1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion. Networking 4G LTE with GPS and BeiDou positioning for delivery and field service routes. Power input Single-cell Li-Polymer pack with onboard charge management, fuel-gauge reporting and fast-charge profile, pack capacity selected per shift length and printer duty. Duty profile Continuous field duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for cold-chain and outdoor routes. PCB Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port. Certifications CE / FCC / RoHS / REACH with EMV and PCI-relevant documentation support. Wanlin's 2026 export roadmap for Nigeria also covers custom memory and storage combos, printer and scan engine interface selection, contactless antenna placement, custom peripheral drivers, private-label branding and per-destination certification documentation packages.

Executive Summary - Delivery Logistics and Warehouse Handheld Terminal Boards Export for Global B2B Buyers

Executive summary - 10 buyer-relevant points:

• Featured model RK3568-DL120, Delivery Logistics and Warehouse Handheld Terminal Boards, Rockchip RK3568 quad-core SoC, 4x Cortex-A55 with an integrated NPU
• CPU 4x ARM Cortex-A55 up to 2.0GHz, 64-bit architecture
• GPU ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1
• Render and security path Mali-G52 2EE render path with the on-chip NPU handling QR decoding assist, face detection and OCR work
• Video decode Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for audit capture
• Memory and storage 8GB LPDDR4X + 16GB eMMC
• OS Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher
• Display and touch 5.5-inch 720x1440 MIPI DSI panel with capacitive multi-touch and glove-mode tuning
• MOQ 100 pcs, lead time 16-24 days, FOB Shenzhen / CIF / EXW / DDP supported, 24 months warranty
• Field reference: fixed asset audit across a plant estate - audit duration per plant fell from 9 days to 3
• Target buyer: courier and postal operators, e-commerce logistics providers, warehouse and 3PL integrators, fleet operators and regional Android board distributors
• Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

Importers, payment terminal brands and acquiring-side integrators shortlisting Delivery Logistics and Warehouse Handheld Terminal Boards vendors can check each claim below against export paperwork. Wanlin Group operates its own 12,000 m2 manufacturing facility in Shenzhen with 8 SMT lines, 4 AOI inspection stations and 2,400 m2 of cleanroom assembly, exporting handheld POS boards to 60+ countries under the AndroidSBC brand. Total cost of ownership for an AndroidSBC Delivery Logistics and Warehouse Handheld Terminal Boards deployment typically runs 42-60% below x86-based cashier hardware once per-device OS licensing and patch handling are counted. For Nigeria, this article maps the model line, the economics and the compliance route specific to your market.

Global Delivery Logistics and Warehouse Handheld Terminal Boards Market Overview and 2026 Buyer Demand

Logistics handheld boards priced USD 52-104 FOB Shenzhen anchor the volume tier, with MOQ 100 pcs typical and 16-24 day lead times on stocked configurations. Returns and reverse logistics are the fastest growing handheld workload, and they reward scanning that reads a customer screen code.

Regional compliance for Nigeria is anchored on NCC type approval and SONCAP import conformity documentation. Cross-border buyers are advised to verify the certification scope, the contactless behaviour and the software build of every board before import, since some China-supplied boards ship without destination radio approval, without the payment documentation the acquirer asks for, or without the Android build the project actually needs, and any of those gaps can stall customs clearance or a scheme review.

Reference: Wanlin Group 2026 handheld POS export program documentation, Rockchip and Allwinner platform datasheets, field deployment records 2024-2026.

Delivery Logistics and Warehouse Handheld Terminal Boards Engineering Architecture and Hardware Platform

The handheld POS family is engineered on three pillars: (1) an Rockchip RK3568 quad-core SoC, 4x Cortex-A55 with an integrated NPU compute block with Mali-G52 2EE render path with the on-chip NPU handling QR decoding assist, face detection and OCR work; (2) a display and capture pipeline built around Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for audit capture; (3) a software layer pairing Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher with OTA tooling, device management and the Rockchip RK3568 Android BSP, AOSP build support, peripheral driver kit and the AndroidSBC SDK kit. This architecture delivers continuous field duty on battery at a cost point that undercuts cashier PCs while keeping the payment, print and scan response operators expect.

Three sub-modules define the engineering depth:

• Compute module - Rockchip RK3568 quad-core SoC, 4x Cortex-A55 with an integrated NPU. 4x ARM Cortex-A55 up to 2.0GHz, 64-bit architecture handles payment UI, catalogue screens, signature capture and on-device vision work inside a fanless handheld shell.
• Display and capture module - 5.5-inch 720x1440 MIPI DSI panel with capacitive multi-touch and glove-mode tuning. MIPI CSI camera input for face payment cameras, barcode imagers and document capture covers the camera input used for face payment, document capture and proof of delivery, so one device closes the transaction and records the evidence.
• Peripheral and management module - 1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion. Headless recovery is supported through the USB service path, and the toolchain covers Rockchip RK3568 Android BSP, AOSP build support, peripheral driver kit and the AndroidSBC SDK kit, OTA upgrade, boot animation customization, pre-installed app support and launcher customization for remote fleet management.

Mechanically the board is a Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port, which is why it drops into handheld shells, vehicle cradles and belt-worn cases without a tooling change.

Featured Model - RK3568-DL120 Standard Technical Signature

The featured model is RK3568-DL120, part of the Delivery Logistics and Warehouse Handheld Terminal Boards family, configured in this batch with 8GB LPDDR4X memory and 16GB eMMC storage. FOB Shenzhen reference price is $99.50 per piece at MOQ 100 pcs, with bulk tier pricing from $85.57 to $111.44 depending on memory and storage combination, radio set, regional certification and packaging artwork. Lead time is 16-24 days from PO confirmation and 30% T/T deposit receipt, with a 24-month warranty.

The technical signature of RK3568-DL120 on this configuration is documented below. Every parameter is verified by our Shenzhen lab against the printer duty profile, the contactless read behaviour of the final enclosure and the electrical limits of IEC / UL 62368-1.

Specification	Value
soc_platform	Rockchip RK3568 quad-core SoC, 4x Cortex-A55 with an integrated NPU
cpu_core	4x ARM Cortex-A55 up to 2.0GHz, 64-bit architecture
gpu_3d	ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1
render_security_path	Mali-G52 2EE render path with the on-chip NPU handling QR decoding assist, face detection and OCR work
video_decode	Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for audit capture
camera_input	MIPI CSI camera input for face payment cameras, barcode imagers and document capture
memory_storage	8GB LPDDR4X + 16GB eMMC
os_android	Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher
display_touch	5.5-inch 720x1440 MIPI DSI panel with capacitive multi-touch and glove-mode tuning
audio_signalling	Speaker with voice broadcast of amount and payment result in the selected language
interfaces_io	1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion
networking	4G LTE with GPS and BeiDou positioning for delivery and field service routes
power_input	Single-cell Li-Polymer pack with onboard charge management, fuel-gauge reporting and fast-charge profile, pack capacity selected per shift length and printer duty
duty_profile	Continuous field duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for cold-chain and outdoor routes
pcb_mechanics	Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port
certifications	CE / FCC / RoHS / REACH with EMV and PCI-relevant documentation support
use_case	handheld terminals for couriers, warehouse pickers and cold chain drivers that scan parcels, take cash or card on delivery, print waybills and labels, capture proof of delivery and report position back to the dispatch system over 4G and WiFi

Delivery Logistics and Warehouse Handheld Terminal Boards Application Scenarios across Deployment Sites

Field records from operating Delivery Logistics and Warehouse Handheld Terminal Boards installations follow, with site, unit count and the numbers the operator tracked.

Scenario 1: fixed asset audit across a plant estate (Kitakyushu, Japan). An industrial group runs 240 handhelds for annual asset audits, scanning asset tags offline and reconciling the count against the register at the end of each area walk. Measured result: audit duration per plant fell from 9 days to 3 and unlocated assets fell 67%.

Scenario 2: reverse logistics and returns at the doorstep (Salvador, Brazil). A retailer equipped 1,100 handhelds for returns at the doorstep, scanning the return code, printing the return label and issuing the refund authorisation before the parcel leaves the customer. Measured result: return processing time fell from 6 days to 2 and return label errors dropped 94%.

Scenario 3: cash on delivery with same-day settlement reporting (Tbilisi, Georgia). A courier operator equipped 2,400 riders with handhelds that take cash on delivery, print the receipt and report the collected amount per route before the rider returns to the depot. Measured result: cash reconciliation time per depot fell from 3 hours to 35 minutes and unreported collections dropped to zero.

Scenario 4: fresh produce collection at farm gates (Vientiane, Laos). An agricultural buyer equipped 480 field agents with handhelds that weigh, price and print a purchase slip at the farm gate, then settle to the grower account over 4G. Measured result: payment disputes at collection points fell to zero and collection point throughput rose 2.4x.

Scenario 5: last-mile route with offline capture (Sofia, Bulgaria). An e-commerce carrier fitted 3,100 handhelds with an offline queue that holds scans and signatures through basement and rural dead spots, posting them when the signal returns. Measured result: missing scan events fell to zero and customer support tickets about tracking gaps dropped 79%.

AndroidSBC Delivery Logistics and Warehouse Handheld Terminal Boards Competitive Advantages for Cross-Border Buyers

The handheld POS board and the wider AndroidSBC payment device portfolio deliver eight advantages for cross-border B2B buyers sourcing from Chinese manufacturers:

1. Source-factory pricing - Wanlin operates the SMT lines, so FOB Shenzhen pricing runs 42-60% below western-branded payment terminals with no per-device licence fee.
2. Payment path coverage - QR, barcode, NFC contactless, EMV chip and magnetic stripe on one board, with secure boot, tamper inputs and key storage where the scheme asks for it.
3. Printer and scan integration - thermal printer head and cutter control plus a scan engine UART on the board, so receipt and scan do not need a second controller.
4. Radio coverage - 4G LTE with dual-SIM and eSIM options, dual-band WiFi, Bluetooth and GNSS positioning, so one board serves retail, delivery and field service channels.
5. Offline behaviour - transaction and scan queueing that posts when the signal returns, because the places where payment happens are the places where coverage fails.
6. Peripheral and service path - 1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion, covering printer, scanner, camera, RFID, SIM and TF, GPIO and serial expansion, plus a USB service port for field recovery.
7. Multi-OS flexibility - Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher, so GMS devices, AOSP payment builds and private-label launcher programmes run on one board.
8. Unattended reliability - hardware watchdog, RTC retention, scheduled power on and off, auto power on after a mains cut and OTA with a canary ring.

Combined, these advantages let AndroidSBC partners win retail, delivery, banking and private-label programmes, secure regional distribution rights, and serve end customers under their own brand at a landed cost 35-45% below legacy suppliers.

Delivery Logistics and Warehouse Handheld Terminal Boards Certifications, Electrical Performance and Assembly Notes

The RK3568-DL120 carries CE / FCC / RoHS / REACH as standard scope. Optional add-on documentation available on request includes UKCA, KC, PSE, SAA, RCM and EAC packs, country-specific declaration templates and UL 62368-1 test reports. All boards are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch. For payment projects we support the documentation set that scheme certification asks for, including secure boot configuration, tamper response and key handling notes.

Electrical performance is characterised against the final enclosure: Single-cell Li-Polymer pack with onboard charge management, fuel-gauge reporting and fast-charge profile, pack capacity selected per shift length and printer duty, with the printer head supplied on its own power path and the contactless antenna tuned with the shell closed. The board is specified for Continuous field duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for cold-chain and outdoor routes, which covers handheld shells, vehicle cradles and belt-worn cases with no fan and no vent.

Assembly and integration notes every integration team should run through before closing an enclosure:

• Budget the printer head supply as a separate power path with its own bulk capacitance, because the thermal head draws a sharp current pulse on every line of a receipt and will brown out the logic rail if it shares it
• Keep the MIPI DSI flex inside the bend radius drawn for the connector and strain-relieve it at both ends, since a handheld survives drops mainly by not loading the display connector
• Bond the battery NTC thermistor to the cell and route its sense wires away from the printer and motor currents, because a misread cell temperature derates charging in summer and overcharges in cold rooms
• Place the contactless antenna away from the battery, the shielding can and any metal bracket, then tune it with the final enclosure closed, since detuning shows up as read failures at the till rather than in the lab
• Configure secure boot and the tamper detection inputs before the security review, since payment schemes ask for the keys and the tamper response during certification rather than after
• Support the PCBA on all screw bosses and keep it flat in the shell, because a flexed board cracks BGA joints under drop testing and the failure appears weeks later in the field
• Seal the USB Type-C opening and give it ESD protection on the data lines, since the service port is the main entry point for both water and static in handheld duty

Cross-border buyers should note that handheld payment compliance combines product marking, radio certification, safety evaluation and the scheme documentation the acquirer asks for. For Nigeria specifically, importers should confirm NCC type approval and SONCAP import conformity documentation before shipment. Wanlin provides a pre-validated compliance package per model with DoC templates, test report copies and label artwork, reducing importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.

Delivery Logistics and Warehouse Handheld Terminal Boards Economics, MOQ, Lead Time and Logistics Math

For a first-time buyer ordering 1,000 pieces of the RK3568-DL120, the economics stack is:

Cost Layer	USD per piece	USD for 1000 pcs
FOB Shenzhen factory price	$99.50	$99500.00
+ Sea freight FCL 40HQ (estimated)	$2.10	$2100.00
CIF destination port	$101.60	$101600.00
+ Customs duty 3%-10% (region dependent)	$0.64	$637.10
+ Local delivery + warehousing	$3.80	$3800.00
DDP landed cost	$106.04	$106040.00

Sample order cost is USD 60 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term; L/C at sight is accepted for orders above USD 80,000. Production lead time is 16-24 days, warranty is 24 months, and free DOA replacement applies within 60 days of receipt.

Delivery Logistics and Warehouse Handheld Terminal Boards FAQ - OEM, ODM, MOQ, Lead Time, Partnership

Below are eight frequently asked questions from cross-border buyers sourcing handheld POS boards from China. Each answer is anchored on Wanlin's commercial terms, certification scope and field experience across 60+ export markets under the AndroidSBC brand.

What is the difference between OEM and ODM for Delivery Logistics and Warehouse Handheld Terminal Boards?

Answer: OEM (Original Equipment Manufacturer) means Wanlin Group builds the board, the handheld terminal or the finished payment device under your brand with your PCB silk-screen, logo, packaging and SKU. ODM (Original Design Manufacturer) means we redesign the carrier board, memory and storage combination, radio set, printer and scan engine interfaces, firmware or enclosure around your project. Both run from the same Shenzhen factory and the same firmware team: OEM lead time is 16-24 days and ODM 25-40 days including pre-compliance checks. Schematic review, custom carrier layout, AOSP build work, driver tuning and certification support are provided under NDA.

Which handheld POS board should I source for my application?

Answer: Eight selection rules for cross-border buyers:

• (1) Mobile payment and handheld cashier: HP-MP110 / HP-MP130 class with 4G, QR and contactless payment and an on-board receipt printer path.
• (2) Retail and supermarket aisle checkout: HP-RS120 / HP-RS140 with a scan engine interface, a local price file and label printing.
• (3) Restaurant, hotel and hospitality: HP-RH120 / HP-RH140 with bill splitting, voice prompt of the amount and wet-finger touch tuning.
• (4) Delivery, logistics and warehouse: HP-DL130 / HP-DL150 with offline scan queueing, proof of delivery capture and waybill printing.
• (5) Biometric and contactless payment: HP-PY150 / HP-PY170 with face or fingerprint authorisation, secure boot, tamper inputs and key storage.
• (6) Banking, insurance and field service: HP-BF130 / HP-BF150 with identity capture, printed acknowledgement and offline queueing.
• (7) Ticketing, parking and transport: HP-TT120 / HP-TT140 with offline validation, fast print and a battery sized to a full shift.
• (8) Private-label programmes and redesign work: HP-OD170 / HP-OD180 with carrier redesign, BSP porting, signed firmware, per-unit provisioning and a last-time-buy window.

What software support comes with the boards?

Answer: Every board ships with the Android image (Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher), BSP source access, driver documentation, SDK material and OTA tooling. The build supports GMS where the destination market and product category qualify; for payment-only projects that do not need Google services, the same hardware runs a full AOSP build, which also lowers unit cost. Kiosk-mode launchers, auto-start app configuration, custom boot animation, scheduled behaviour and remote device management agents are part of the standard integration work. The media stack covers the video, audio and image formats listed in the platform section, and the payment stack covers QR, barcode, NFC contactless, EMV chip and magnetic stripe paths with hardware backed key storage where the project requires it.

How do Wanlin handheld POS boards compare with branded terminals and x86 cashier boxes?

Answer: Because Wanlin builds the boards rather than reselling them, landed cost typically runs 42-60% below western-branded payment terminals and 25-38% below a resold retail device on equivalent radio, display and printer support. On the engineering side, this configuration brings Rockchip RK3568 quad-core SoC, 4x Cortex-A55 with an integrated NPU, 4x ARM Cortex-A55 up to 2.0GHz, 64-bit architecture and ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1, with the BSP covering Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher. Licensing cost also disappears: cashier PCs carry per-device OS licence fees and patch cycles, while the Android build carries none. The compact handheld PCBA also drops into enclosures that were designed around a larger terminal, which usually removes a docking station and a second power supply from the kit.

Can the board drive the display, the printer and the full peripheral set?

Answer: Yes. 5.5-inch 720x1440 MIPI DSI panel with capacitive multi-touch and glove-mode tuning. The peripheral stack covers thermal receipt printers with cutter control, 1D and 2D scan engines over UART, NFC and contactless readers, magnetic stripe and IC card readers, fingerprint modules, face cameras over MIPI CSI, RFID readers, SIM and TF card slots, GPIO and I2C or SPI expansion, plus a USB service path for field recovery. Audio covers speaker output, voice prompt playback, microphone capture and a vibration motor driver. Drivers ship with the image; if a peripheral is not yet in our driver library, our firmware team writes and validates the driver as part of the ODM scope.

What are the MOQ, lead time, trade terms, sample policy and warranty?

Answer: MOQ is 100 pcs per model. Lead time is 16-24 days for standard configurations and 25-40 days for ODM customization. Trade terms are FOB Shenzhen, CIF by sea or air, EXW factory and DDP door-to-door. Payment is 30% T/T deposit with 70% balance against the B/L copy; L/C at sight is accepted above USD 80,000. Samples ship in 1-3 days via DHL Express at USD 60 per SKU, refundable against the first bulk order. Warranty is 24 months, with free DOA replacement within 60 days of receipt.

Which certifications do the boards carry and what is included for importers?

Answer: Boards ship with CE / FCC / RoHS / REACH declarations per batch from an ISO 9001:2015 and ISO 14001:2015 certified factory. UKCA, KC, PSE, SAA, RCM, EAC and UL 62368-1 report documentation is available on request, and NCC type approval and SONCAP import conformity documentation. For payment projects we also support the documentation set that scheme certification asks for, including secure boot configuration, tamper response description and key handling notes. We provide DoC templates, test report copies, label artwork and a pre-validated compliance package per model, which shortens importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.

What customization and partnership options does Wanlin offer?

Answer: Customization scope:

1. (1) Branding - custom PCB silk-screen, private-label logo on board and enclosure, custom SKU, packaging and boot animation.
2. (2) Firmware - custom launcher, kiosk lock-down, pre-installed apps, multilingual UI packs, custom boot logo and a signed OTA channel.
3. (3) Hardware - carrier board redesign, memory and storage combinations, radio set selection, printer and scan engine interface placement, contactless antenna routing, SIM and TF slot layout and battery pack matching.
4. (4) Software - AOSP build service, BSP porting, peripheral driver development, SDK modules, remote device management agent integration and API work against your own POS application.
5. (5) Delivery - DDP shipping, overseas-warehouse labelling, per-batch serial and key provisioning.

Partnership tiers: Authorized Reseller (list price), Regional Distributor (20% off, single-country exclusivity) and Strategic OEM Partner (30% off, multi-country exclusivity, dedicated engineering team).

Wanlin Global Partner Stories - Real Project References

Four buyer references from 2024-2026 follow, anonymized under partner agreements, with city, application and the result the buyer tracked.

The table below is anonymized by agreement but every row carries a real city, application and quantified outcome from 2024-2026.

City	Application	Outcome
Winnipeg, Canada	warehouse and last mile on one board	an integrator ships the same PCBA into a warehouse kit and a rider kit, holding one spare-part SKU across 30 accounts.
Rosario, Argentina	courier fleet standardising on one board	a carrier runs one board across 1,400 riders with Spanish defaults, a locked launcher and per-unit provisioning before each route handover.
Kampala, Uganda	carrier rollout with radio filings	a carrier needed regional radio filings for a national rollout; Wanlin coordinated the filings and delivered pre-validated test copies.
Umea, Sweden	winter route build	a Nordic distributor specified a low-temperature startup profile and glove-mode touch tuning for drivers working loading bays through winter.

Partnership Models - Authorized Reseller, Regional Distributor, Strategic OEM

Wanlin offers three partnership tiers for cross-border buyers of Delivery Logistics and Warehouse Handheld Terminal Boards:

• Authorized Reseller - annual volume USD 20,000+, list price, no exclusivity, standard 24-month warranty, dedicated account manager with a response within 4 business hours.
• Regional Distributor - annual volume USD 80,000+, 20% off list, single-country exclusivity, co-marketing budget, joint certification cost-share, free BSP and firmware updates for the life of the product.
• Strategic OEM Partner - annual volume USD 250,000+, 30% off list, multi-country exclusivity, dedicated engineering team, joint roadmap, 18-month price lock and one joint trade-show booth per year at GITEX Global, Money20/20, Canton Fair or the Hong Kong Electronics Fair in Hong Kong, China on a cost-share basis.

All partners receive free certification documentation and test report copies, custom Android image support, free DOA replacement within 60 days, per-batch serial and key provisioning, and a sample programme with USD 60 per SKU refundable against the first bulk order above MOQ.

Conclusion - How to Start Your Delivery Logistics and Warehouse Handheld Terminal Boards Sourcing Today

Wanlin Group's 2026 handheld POS export program is open to B2B buyers, regional distributors, cross-border traders and OEM/ODM partners in Nigeria and 60+ destination markets. To start a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, contact the export team below. Sample orders ship within 1-3 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 16-24 days, and Strategic OEM Partner applications are reviewed quarterly.

We invite Nigeria buyers, export traders and trading companies to build long-term cooperation with Wanlin Group as your China-based OEM/ODM partner, regional exclusive distributor or strategic global supplier under the AndroidSBC brand. Wanlin is the manufacturer behind the handheld POS board line, the SMT lines and aging rooms behind every batch, and this export program. Let's build the Delivery Logistics and Warehouse Handheld Terminal Boards supply chain together.

---

Model: RK3568-DL120
Platform: Rockchip RK3568 quad-core SoC, 4x Cortex-A55 with an integrated NPU
CPU: 4x ARM Cortex-A55 up to 2.0GHz, 64-bit architecture
GPU: ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1
Render / security: Mali-G52 2EE render path with the on-chip NPU handling QR decoding assist, face detection and OCR work
Video: Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for audit capture
Camera input: MIPI CSI camera input for face payment cameras, barcode imagers and document capture
Memory: 8GB LPDDR4X
Storage: 16GB eMMC
OS: Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher
Display and touch: 5.5-inch 720x1440 MIPI DSI panel with capacitive multi-touch and glove-mode tuning
Audio: Speaker with voice broadcast of amount and payment result in the selected language
Network: 4G LTE with GPS and BeiDou positioning for delivery and field service routes
Interfaces: 1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion
Power: Single-cell Li-Polymer pack with onboard charge management, fuel-gauge reporting and fast-charge profile, pack capacity selected per shift length and printer duty
Field duty: Continuous field duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for cold-chain and outdoor routes
PCB: Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port
Cert: CE / FCC / RoHS / REACH with EMV and PCI-relevant documentation support
MOQ / Lead / Warranty: 100 pcs / 16-24 days / 24 months
FOB Shenzhen reference price: $99.50 per piece at MOQ 100 pcs
Region: Nigeria
Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

• Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
• Manufacturer: Wanlin Group / Brand: AndroidSBC / Site: www.androidsbc.com
• Export service: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com
• Form factor: Delivery Logistics and Warehouse Handheld Terminal Boards / Platform: Rockchip RK3568 quad-core SoC / PCB: Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port
• Country compliance for Nigeria: NCC type approval and SONCAP import conformity documentation