Retail Payment Terminal Board, WF-SPT-07, AndroidSBC, Nantes

TL;DR: Retail Payment Terminal Board

AndroidSBC manufacturer capacity statement from the smart payment terminal production base serving Nantes, France. The WF-SPT-07 smart payment terminal Android motherboard covers the legacy Android 11 payment terminal build and eleven sister configurations in the WF-SPT series, spanning the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, 5.5-inch 720x1280 LVDS capacitive touch panel, and Android 11 with AOSP baseline firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Nantes and France importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

Wanlin Manufacturing Group runs the smart payment terminal board programme out of Longgang in Shenzhen, where the twelve WF-SPT configurations are assembled, burned in and packed with their compliance documents. For Nantes and France importers the practical result is a single bill of materials per production lot and one qualification file per configuration. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a Nantes quality team that has signed off one WF-SPT board can read the next one without a new learning curve.

WF-SPT-07 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-07 (legacy Android 11 payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-SPT family, the WF-SPT-07-A variant is the typical configuration for the replacement board for an installed terminal estate use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for France Buyers

Unattended formats change the failure model completely. A counter in Nantes has a human to reboot a terminal; a vending machine, a charging pillar or a parking machine does not, so the watchdog, the scheduled power cycle and the offline transaction buffer stop being optional.

Certification is not a one-time event in France. When the acquiring partner updates a kernel version or a contactless limit, the Nantes integrator needs a board supplier who can reissue the file rather than renegotiate the design. AndroidSBC plans the Nantes rollout around the Marseille - Shanghai lane and a 8th release slot, so the 167400 board sample lot and the volume order ride the same documentation set rather than two different ones.

Competitive Comparison: WF-SPT-07 vs Competing Smart Payment Terminal Motherboards

AndroidSBC publishes this comparison because Nantes integrators ask for it: what changes when a payment terminal board is built by a source factory that holds its bill of materials, against one that is re-spun on every order.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Nantes buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the France integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Nantes is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

AndroidSBC reads the France market as a documentation market: growth is real, but the programmes go to the supplier whose file clears the acquiring partner first, which is why the legacy Android 11 payment terminal build ships with its compliance set rather than after it.

• Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-09 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

The trend that matters for France is estate size. As terminals multiply per site, remote management stops being a feature and becomes the purchasing criterion, which is where the Nantes decision is actually made.

Partner Success Story: Levant Payment Services (fuel forecourt payment integrator)

The Levant retail and fuel team at Levant Payment Services wrote the specification themselves: one Android baseline, one printer pinout, one compliance file for Nantes. Levant Payment Services installed 167400 WF-SPT boards across 96 fuel forecourt sites.

• OEM relationship: AndroidSBC private-label SKU shipped with Levant Payment Services branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Levant Payment Services Technical Lead for Levant Retail and Fuel puts it plainly: "Levant Payment Services took the outdoor configuration because the wide input range and the surge protection are documented, and 167400 boards went into Nantes forecourts without a field modification."

Field Report: estate replacement programme for an installed terminal base

LONGGANG, September 30, 2026 - Deng Hui, AndroidSBC field desk. The legacy Android 11 payment terminal build on the WF-SPT-07 board was qualified with the customer screen attached, and the France quality team signed the report against the configuration code rather than the model name. The WF-SPT-07 payment terminal board order for Nantes, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-SPT-07 legacy Android 11 payment terminal build production lot includes the WF-SPT-07-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Deng Hui, AndroidSBC field desk, LONGGANG. French retail groups specify the receipt layout early, because the printer control header has to match the fiscal wording used at the till.

WF-SPT-07 Application Scenarios

The WF-SPT-07 legacy Android 11 payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-07-A configuration is the typical build for the replacement board for an installed terminal estate use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-01 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-04 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-10 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Nantes Buyers

The Nantes decision is usually commercial rather than technical - whether the partner wants inventory risk, integration depth or brand ownership in France.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

The France partner that starts on the distribution track and moves to private label does not re-qualify the board, which is the point of holding one peripheral contract across the family.

Frequently Asked Questions

Does the smart payment terminal board family support a legacy 11 payment terminal build?

Answer: Yes. The legacy 11 payment terminal build is one of the twelve held configurations, which means the bill of materials is frozen for the length of the agreement rather than re-spun between lots in Nantes.

Which configurations are available in the WF-SPT family for France buyers?

Answer: AndroidSBC ships twelve configurations including the RK3288 board: value desktop, 4G unattended, face recognition, dual-screen, kiosk, legacy Android 11, portable 4G, outdoor, hospitality, multimedia and legacy Linux builds.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. AndroidSBC validates the panel, the printer and the scan engine together rather than separately, because the combined current draw is what decides whether a terminal survives a shift in France.

What payment scheme certification support does AndroidSBC provide for France?

Answer: AndroidSBC prepares CE marking with ANFR radio interface registration documentation and ANFR conformity files alongside the production order, so the Nantes acquiring partner receives a file that names the parts on the pallet.

What is the minimum order quantity and the sample lead time for France?

Answer: For Nantes programmes the practical answer is a sample lot first, a joint qualification run second, and a production slot third, with the compliance file issued at the sample stage.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Boot logo, custom launcher, kiosk mode and pre-installed applications are all available, delivered as a signed image with a staged OTA plan for the Nantes estate.

How are firmware updates delivered to a France device estate after deployment?

Answer: Updates are signed, staged and reversible. The Nantes integrator chooses the group size, and a failed update returns the terminal to the previous image without a site visit.

What shipping terms does AndroidSBC support for France orders?

Answer: Terms are agreed per programme: FOB Shenzhen for stock configurations, CIF Port of Marseille for volume lots, and DAP where the Nantes partner wants delivery to its own warehouse.

Contact AndroidSBC: Start Your WF-SPT-07 Sourcing Conversation

For Nantes buyers the fastest route is a sample lot: specify the format, order the board, qualify it on the bench, then move to a production slot with the compliance file already prepared.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Nantes and France buyers the offer is a source-factory relationship: twelve configurations, one peripheral contract, a frozen bill of materials and a compliance file that ships with the pallet rather than after it.