X9 network advertising player board Dual-Screen for Belgium Buyers - Wholesale Advertising Machine a

As of September 24, 2026, the X9-AV150 leaves Shenzhen for Belgium importers under Wanlin Group's 2026 Advertising Machine and Digital Signage Boards export program, shipping with Allwinner A133 quad-core SoC (X9 board platform), 1GB LPDDR4 + 16GB eMMC, Hardware 4K@30fps H.265 / H.264 / VP9 decode, Android 10 with GMS option, dual LVDS panel drive: Advertising Machine and Digital Signage Boards, X9-AV150, 1GB LPDDR4 + 16GB eMMC, with indoor and semi-outdoor advertising players, storefront window screens, building lobby displays and floor-standing signage running loop, timed and interrupt playback from one board, configured to the needs of Advertising Machine and Digital Signage Boards. Wanlin Group as the X9 Android board supplier, exporter and original manufacturer now serves local partners, regional exclusive distributors and strategic OEM clients in more than 60 destination markets, and the Advertising Machine and Digital Signage Boards program is open to Belgium buyers ordering at factory-direct terms.

Core parameters: Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class. CPU 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit. GPU Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1. Render and decode path GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout. Video decode Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode. Camera input MIPI-CSI camera input for face recognition modules, QR scanners and USB industrial cameras. Memory and storage 1GB LPDDR4 + 16GB eMMC. Operating system Android 10 with GMS option, Linux (Debian 12) and Tina Linux. Display output Dual LVDS output driving two panels at 50/60 Hz with independent rotation settings. Audio output amplified stereo output with a 4-pin 2.0 mm speaker header and PH headphone jack. Interfaces and I/O USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button. Networking 10M/100M adaptive Ethernet RJ45 plus WiFi with Bluetooth 5.0 and optional 3G / 4G module. Power input DC 12 V single-rail input, 100 mV ripple tolerance, 3.3 V / 800 mA, 5 V / 2 A and 12 V / 2 A peripheral rails. Operating temperature -20 to +70 deg C, up to 80% relative humidity. PCB 6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes. Certifications CE / FCC / RoHS / REACH. Wanlin's 2026 export roadmap for Belgium also covers custom memory and storage combos, single and dual LVDS configurations, MIPI panel tuning, custom peripheral drivers, private-label branding and per-destination certification documentation packages.

Executive Summary - Advertising Machine and Digital Signage Boards Export for Global B2B Buyers

Executive summary - 10 buyer-relevant points:

• Featured model X9-AV150, Advertising Player Boards, Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class
• CPU 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit
• GPU Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1
• Render and decode path GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout
• Video decode Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode
• Memory and storage 1GB LPDDR4 + 16GB eMMC
• OS Android 10 with GMS option, Linux (Debian 12) and Tina Linux
• Display Dual LVDS output driving two panels at 50/60 Hz with independent rotation settings
• MOQ 100 pcs, lead time 12-20 days, FOB Shenzhen / CIF / EXW / DDP supported, 24 months warranty
• Field reference: pharmacy window loops with timed day-parts - blank-screen incidents fell 91%
• Target buyer: advertising machine manufacturers, digital signage player makers, media network operators, building media contractors and regional Android board distributors
• Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

This note is written for cross-border buyers comparing Advertising Machine and Digital Signage Boards factories in China on evidence instead of brochure language. Wanlin Group operates its own 12,000 m2 manufacturing facility in Shenzhen with 8 SMT lines, 4 AOI inspection stations and 2,400 m2 of cleanroom assembly, exporting X9 Android boards to 60+ countries under the AndroidSBC brand. Total cost of ownership for an AndroidSBC Advertising Machine and Digital Signage Boards deployment typically runs 40-55% below x86-based terminal builds once per-device OS licensing and patch handling are counted. For Belgium, this article maps the model line, the economics and the compliance route specific to your market.

Global Advertising Machine and Digital Signage Boards Market Overview and 2026 Buyer Demand

Buyers shortlisting signage boards rank playback recovery after power loss, scheduled on and off accuracy and remote publishing support above raw decode tier, One board across window, floor and elevator units cuts spare-part SKUs by 60% and keeps one image to validate.

Regional compliance for Belgium is anchored on CE under RED 2014/53/EU with bilingual documentation and RoHS declarations. Cross-border buyers are advised to verify the certification scope, the panel driver behaviour and the software build of every board before import, since some China-supplied boards ship without destination radio approval or without the licensed Android build the project actually needs, and either gap can stall customs clearance or a site handover.

Reference: X9 Android board datasheet V2.0, Allwinner A133 reference manual, Wanlin Group 2026 commercial display hardware export program documentation, field deployment records 2024-2026.

Advertising Machine and Digital Signage Boards Engineering Architecture and Hardware Platform

The X9 family is engineered on three pillars: (1) an Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class compute block with GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout; (2) a display, camera and peripheral pipeline built around Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode; (3) a software layer pairing Android 10 with GMS option, Linux (Debian 12) and Tina Linux with publishing management, OTA tooling and the Allwinner Tina Linux BSP, AOSP build support and the AndroidSBC SDK kit. This architecture delivers continuous 24/7 display duty at a cost point that undercuts x86 media players while keeping the touch responsiveness and panel timing integrators expect.

Three sub-modules define the engineering depth:

• Compute module - Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class. 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit handles sustained playback rendering, screen rotation and mixed media workloads in fanless enclosures.
• Display and camera module - Dual LVDS output driving two panels at 50/60 Hz with independent rotation settings. Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode drives LVDS and MIPI panels directly, and the camera path serves face recognition modules, QR scanners and USB industrial cameras.
• Peripheral and management module - USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button. Headless operation is supported for display-only units fed over the site network, and the toolchain covers Allwinner Tina Linux BSP, AOSP build support and the AndroidSBC SDK kit, OTA upgrade, boot logo customization, pre-installed app support and launcher customization for remote fleet management.

Mechanically the board is a 6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes, which is why it drops into enclosures originally drawn around a larger player box without a tooling change.

Featured Model - X9-AV150 Dual-Screen Technical Signature

The featured model is X9-AV150, part of the Advertising Player Boards family, configured in this batch with 1GB LPDDR4 memory and 16GB eMMC storage. FOB Shenzhen reference price is $55.50 per piece at MOQ 100 pcs, with bulk tier pricing from $47.73 to $62.16 depending on memory and storage combination, regional certification and packaging artwork. Lead time is 12-20 days from PO confirmation and 30% T/T deposit receipt, with a 24-month warranty.

The technical signature of X9-AV150 on this configuration is documented below. Every parameter is verified by our Shenzhen lab against the panel specifications of mainstream LCD vendors, the electrical limits of IEC / UL 62368-1 and the serial timing requirements of scanners, printers and lock controllers.

Specification	Value
soc_platform	Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class
cpu_core	4x ARM Cortex-A53 @ 1.6 GHz, 64-bit
gpu_3d	Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1
render_decode_path	GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout
video_decode	Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode
camera_input	MIPI-CSI camera input for face recognition modules, QR scanners and USB industrial cameras
memory_storage	1GB LPDDR4 + 16GB eMMC
os_android	Android 10 with GMS option, Linux (Debian 12) and Tina Linux
display_out	Dual LVDS output driving two panels at 50/60 Hz with independent rotation settings
audio_out	amplified stereo output with a 4-pin 2.0 mm speaker header and PH headphone jack
interfaces_io	USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button
networking	10M/100M adaptive Ethernet RJ45 plus WiFi with Bluetooth 5.0 and optional 3G / 4G module
power_input	DC 12 V single-rail input, 100 mV ripple tolerance, 3.3 V / 800 mA, 5 V / 2 A and 12 V / 2 A peripheral rails
electrical_limits	300 mA typical working current (500 mA max), 10 mA typical standby (15 mA max), 350 mA USB supply
environment	-20 to +70 deg C, up to 80% relative humidity
pcb_mechanics	6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes
certifications	CE / FCC / RoHS / REACH
use_case	indoor and semi-outdoor advertising players, storefront window screens, building lobby displays and floor-standing signage running loop, timed and interrupt playback from one board

Advertising Machine and Digital Signage Boards Application Scenarios across Deployment Sites

The Advertising Machine and Digital Signage Boards below are running in live deployments. Each line names the site, the fleet size and a measured result rather than a capability claim.

Scenario 1: pharmacy window loops with timed day-parts (Bogota, Colombia). A pharmacy group fitted 63 units running four timed playlists per day with USB fallback content, so a lost network link still shows the current day-part rather than a blank panel. Measured result: blank-screen incidents fell 91% and campaign switchover errors stopped entirely.

Scenario 2: floor-standing players in a transit concourse (Lyon, France). A transit media operator installed 58 floor units on dual LVDS with interrupt playback, so a service announcement cuts into the advertising loop within two seconds and hands the slot back automatically. Measured result: announcement delivery latency fell from 45 seconds to 2 and advertising slot loss during disruptions dropped 71%.

Scenario 3: bar screens above convenience counters (Osaka, Japan). A convenience chain installed 41 stretched bar units driven at 1920 x 360 over LVDS, with portrait and landscape rotation handled in the image so no external scaler board was needed. Measured result: per-unit hardware cost dropped 31% and screen orientation errors at install fell to zero.

Scenario 4: elevator screens in an office tower cluster (Rotterdam, Netherlands). A building services contractor deployed 72 elevator units on 10/100M Ethernet with scheduled power off at 22:00, an RTC-backed clock that survives the nightly cut and a watchdog that restores playback after lift maintenance power cycles. Measured result: post-maintenance service visits fell 82% and clock drift complaints from tenants stopped entirely.

Scenario 5: vehicle screens on a regional shuttle fleet (Bologna, Italy). A transport operator fitted 26 vehicle units with a 12 V rail shared with the vehicle supply, wide-temperature duty from -20 deg C winter starts and a vibration-tolerant mounting pattern using all four phi 3 mm holes. Measured result: winter cold-start failures fell to zero and unit replacement rate dropped 64% year on year.

AndroidSBC Advertising Machine and Digital Signage Boards Competitive Advantages for Cross-Border Buyers

The X9 board and the wider AndroidSBC commercial display portfolio deliver eight advantages for cross-border B2B buyers sourcing from Chinese manufacturers:

1. Source-factory pricing - Wanlin operates the SMT lines, so FOB Shenzhen pricing runs 40-55% below western-branded x86 media players with no per-device licence fee.
2. Panel interface coverage - single and dual LVDS direct drive at 50/60 Hz plus MIPI DSI on 30-pin and 40-pin connectors, with panel power selected by jumper, because the panel is the first thing an installer gets wrong.
3. Touch coverage with no debugging - capacitive, resistive, infrared and optical touch panels up to 20 points report as HID, so a touch layer swaps without driver work at the site.
4. Peripheral driver coverage - barcode and QR scanners, NFC and IC card readers, password keyboards, fingerprint readers, ID card readers, thermal printers and cameras ship with tested drivers and demo test programs.
5. Playback and publishing depth - loop, timed and interrupt playback modes with RTC-backed scheduling, plus support for the mainstream publishing software already used in the trade.
6. Counter-grade I/O - USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button, covering serial peripherals, GPIO relay and lock control, powered USB rails and wide-voltage input for 24-hour sites.
7. Multi-OS flexibility - Android 10 with GMS option, Linux (Debian 12) and Tina Linux, so Android publishing projects and Linux controller builds run on one board.
8. Continuous-duty reliability - hardware watchdog, RTC, scheduled power on and off, auto-restart after power failure and 7x24 duty from -20 deg C to 70 deg C.

Combined, these advantages let AndroidSBC partners win display, signage, retail, access and industrial tenders, self-service programmes and private-label projects, secure regional distribution rights, and serve end customers under their own brand at a landed cost 35-45% below legacy suppliers.

Advertising Machine and Digital Signage Boards Certifications, Electrical Performance and Assembly Notes

The X9-AV150 carries CE / FCC / RoHS / REACH as standard scope. Optional add-on documentation available on request includes UKCA, KC, PSE, SAA, RCM and EAC packs, country-specific declaration templates and UL 62368-1 test reports. All boards are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch.

Electrical performance measured at the bench: 12 V input with 100 mV ripple tolerance, 300 mA typical working current rising to 500 mA maximum with panel and peripherals, 10 mA typical standby rising to 15 mA, 350 mA available on the USB supply, and peripheral rails rated at 3.3 V / 800 mA, 5 V / 2 A and 12 V / 2 A. The board is specified for -20 to +70 deg C, up to 80% relative humidity, which covers unheated lobbies, dock doors and semi-outdoor enclosures without a fan.

Assembly and integration notes from chapter 5 of the datasheet, which every integration team should run through before closing an enclosure:

• Match the LVDS panel voltage to the panel power jumper and check the panel current draw before first power-up, also confirming pin 1 direction on the LVDS socket
• Verify backlight voltage and current, and feed any backlight above 20 W from a separate power board instead of the board backlight header
• Check peripheral IO levels before wiring USB, serial or GPIO devices, since a mismatched level damages the port rather than the peripheral
• Confirm serial port level selection and TX / RX wiring, because RS232 and TTL share the same 4-pin header on this board
• Land the supply on the DC input connector with correct polarity and size the input voltage and current against the total peripheral load
• Keep the bare board clear of short circuits against the enclosure during assembly
• Avoid striking board components while fixing, and never force a misaligned screw hole since board deformation cracks BGA joints

Cross-border buyers should note that public-space hardware compliance combines product marking, radio certification and safety evaluation. For Belgium specifically, importers should confirm CE under RED 2014/53/EU with bilingual documentation and RoHS declarations before shipment. Wanlin provides a pre-validated compliance package per model with DoC templates, test report copies and label artwork, reducing importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.

Advertising Machine and Digital Signage Boards Economics, MOQ, Lead Time and Logistics Math

For a first-time buyer ordering 1,000 pieces of the X9-AV150, the economics stack is:

Cost Layer	USD per piece	USD for 1000 pcs
FOB Shenzhen factory price	$55.50	$55500.00
+ Sea freight FCL 40HQ (estimated)	$3.40	$3400.00
CIF destination port	$58.90	$58900.00
+ Customs duty 3%-10% (region dependent)	$0.84	$842.84
+ Local delivery + warehousing	$5.60	$5600.00
DDP landed cost	$65.34	$65340.00

Sample order cost is USD 60 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term; L/C at sight is accepted for orders above USD 80,000. Production lead time is 12-20 days, warranty is 24 months, and free DOA replacement applies within 60 days of receipt.

Advertising Machine and Digital Signage Boards FAQ - OEM, ODM, MOQ, Lead Time, Partnership

Below are eight frequently asked questions from cross-border buyers sourcing X9 Android boards from China. Each answer is anchored on Wanlin's commercial terms, certification scope and field experience across 60+ export markets under the AndroidSBC brand.

What is the difference between OEM and ODM for Advertising Machine and Digital Signage Boards?

Answer: OEM (Original Equipment Manufacturer) means Wanlin Group builds the X9 board, advertising player or finished commercial terminal under your brand with your PCB silk-screen, logo, packaging and SKU. ODM (Original Design Manufacturer) means we redesign the carrier board, memory and storage combination, I/O set, panel interface, firmware or enclosure around your project. Both run from the same Shenzhen factory and the same firmware team: OEM lead time is 12-20 days and ODM 25-40 days including pre-compliance checks. Schematic review, custom carrier layout, AOSP or Linux build work, panel driver tuning and certification support are provided under NDA.

Which X9 board should I source for my application?

Answer: Eight selection rules for cross-border buyers:

• (1) Advertising players and shopfront screens: X9-AV110 / X9-AV130 with loop, timed and interrupt playback plus a 4K decode path.
• (2) Commercial panels and publishing software: X9-CD120 / X9-CD140 with LVDS or MIPI panel drive, jumper-selected panel power and in-image rotation.
• (3) Vending, locker and O2O cabinets: X9-RT120 / X9-RT140 with lock feedback on GPIO, serial printers and offline order queues.
• (4) Public self-service points: X9-SS130 / X9-SS150 with cloud publishing, staged OTA rollout and offline content caching.
• (5) Access control and face recognition: X9-AC120 / X9-AC140 with camera bring-up, relay control on GPIO and a local audit trail.
• (6) Interactive and education panels: X9-IT150 / X9-IT170 with plug-and-play HID touch, multi-point accuracy and rotation handled in the image.
• (7) Industrial HMI and gateways: X9-IC120 / X9-IC140 with two RS232 or TTL channels, watchdog recovery and -20 to 70 deg C duty.
• (8) Private-label programmes and redesign work: X9-OD170 / X9-OD180 with carrier redesign, BSP porting, signed firmware, per-unit identity provisioning and a last-time-buy window.

What software support comes with the boards?

Answer: Every board ships with the Android 10 image alongside Linux support (Android 10 with GMS option, Linux (Debian 12) and Tina Linux), BSP source access, driver documentation, SDK material and OTA tooling. The Android build ships with GMS / Play Store where the destination market and product category qualify; for projects that do not need Google services, the same hardware runs a full AOSP or Linux build, which also lowers unit cost. Kiosk-mode launchers, auto-start app configuration, scheduled power on and off, idle reset for demo units and remote publishing agents are part of the standard integration work. Loop, timed and interrupt playback modes ship enabled, and the media stack covers wmv, avi, flv, rm, rmvb, mpeg, ts and mp4 video with BMP, JPEG, PNG and GIF images.

How do Wanlin X9 boards compare with x86 media players and proprietary display boxes?

Answer: Because Wanlin builds the boards rather than reselling them, landed cost typically runs 40-55% below western-branded x86 media players and 25-35% below proprietary commercial display boxes on equivalent panel drive and playback support. On the engineering side, this configuration brings Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class, 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit and Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1, with the BSP covering Android 10 with GMS option, Linux (Debian 12) and Tina Linux. Licensing cost also disappears: media PCs carry per-device OS licence fees and patch cycles, while the Android build carries none. The 120 x 75 mm 6-layer board also drops into enclosures that were designed around a player box, which usually removes an external scaler and one power supply per screen.

Can the board drive LVDS and MIPI panels and the full peripheral set?

Answer: Yes. Dual LVDS output driving two panels at 50/60 Hz with independent rotation settings. The peripheral stack covers barcode and QR scanners on USB or serial, NFC and IC card readers, PIN pad and password keyboard modules, thermal receipt and label printers, fingerprint readers, ID card readers, cameras on MIPI-CSI or USB, infrared receivers, relays and lock drivers on GPIO, plus speakers, amplifiers and microphones on the audio path and ambient sensors on I2C. Touch panels report as HID, so capacitive, resistive, infrared and optical screens run without field debugging. Drivers ship with the image; if a peripheral is not yet in our driver library, our firmware team writes and validates the driver as part of the ODM scope.

What are the MOQ, lead time, trade terms, sample policy and warranty?

Answer: MOQ is 100 pcs per model. Lead time is 12-20 days for standard configurations and 25-40 days for ODM customization. Trade terms are FOB Shenzhen, CIF by sea or air, EXW factory and DDP door-to-door. Payment is 30% T/T deposit with 70% balance against the B/L copy; L/C at sight is accepted above USD 80,000. Samples ship in 1-3 days via DHL Express at USD 60 per SKU, refundable against the first bulk order. Warranty is 24 months, with free DOA replacement within 60 days of receipt.

Which certifications do the boards carry and what is included for importers?

Answer: Boards ship with CE / FCC / RoHS / REACH declarations per batch from an ISO 9001:2015 and ISO 14001:2015 certified factory. UKCA, KC, PSE, SAA, RCM, EAC and UL 62368-1 report documentation is available on request, and CE under RED 2014/53/EU with bilingual documentation and RoHS declarations. We provide DoC templates, test report copies, label artwork and a pre-validated compliance package per model, which shortens importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets. GMS certification support is available where the destination requires Google Play distribution.

What customization and partnership options does Wanlin offer?

Answer: Customization scope:

1. (1) Branding - custom PCB silk-screen, private-label logo on board and enclosure, custom SKU, packaging and boot animation.
2. (2) Firmware - custom launcher, kiosk lock-down, pre-installed apps, multilingual UI packs, custom boot logo and OTA channel.
3. (3) Hardware - carrier board redesign, extra serial channels, custom connector maps, memory and storage combinations (1GB-2GB LPDDR4, 8GB-32GB eMMC), single or dual LVDS output, MIPI 30-pin or 40-pin selection, touch panel tuning for PCAP, resistive, IR and optical overlays, 3G / 4G module options and GPIO, SPI, PWM, ADC and I2C expansion.
4. (4) Software - AOSP build service, Linux BSP porting, panel and peripheral driver development, SDK modules, remote publishing agent integration and playback mode configuration.
5. (5) Delivery - DDP shipping, FBA or overseas-warehouse labelling, per-batch MAC and serial provisioning.

Partnership tiers: Authorized Reseller (list price), Regional Distributor (20% off, single-country exclusivity) and Strategic OEM Partner (30% off, multi-country exclusivity, dedicated engineering team).

Wanlin Global Partner Stories - Real Project References

AndroidSBC X9 boards have shipped to 60+ countries. The four references below cover 2024-2026 projects, each with city, application and quantified outcome.

The table below is anonymized by agreement but every row carries a real city, application and quantified outcome from 2024-2026.

City	Application	Outcome
Yangon, Myanmar	board with local radio filing support	a media supplier needed regional radio filings for a mall rollout; Wanlin coordinated the filings and delivered pre-validated test copies.
Helsinki, Finland	board with a cold-window startup profile	an outdoor operator specified a low-temperature startup profile and a heated-enclosure backlight plan for screens that face a Finnish winter street.
Valencia, Spain	private-label player board for a signage brand	a signage brand private-labels the board with its own silk-screen, Spanish default playlists and per-unit screen parameters on a 4200 unit annual run.
Tallinn, Estonia	one board across window and floor units	an integrator runs the same image on window screens and floor-standing players, holding one spare-part SKU across 240 sites.

Partnership Models - Authorized Reseller, Regional Distributor, Strategic OEM

Wanlin offers three partnership tiers for cross-border buyers of Advertising Machine and Digital Signage Boards:

• Authorized Reseller - annual volume USD 20,000+, list price, no exclusivity, standard 24-month warranty, dedicated account manager with a response within 4 business hours.
• Regional Distributor - annual volume USD 80,000+, 20% off list, single-country exclusivity, co-marketing budget, joint certification cost-share, free BSP and firmware updates for the life of the product.
• Strategic OEM Partner - annual volume USD 250,000+, 30% off list, multi-country exclusivity, dedicated engineering team, joint roadmap, 18-month price lock and one joint trade-show booth per year at GITEX Global, Smart City Expo World Congress, Canton Fair or the Hong Kong Electronics Fair in Hong Kong, China on a cost-share basis.

All partners receive free certification documentation and test report copies, custom Android image support, free DOA replacement within 60 days, per-batch MAC and serial provisioning, and a sample programme with USD 60 per SKU refundable against the first bulk order above MOQ.

Conclusion - How to Start Your Advertising Machine and Digital Signage Boards Sourcing Today

Wanlin Group's 2026 X9 export program is open to B2B buyers, regional distributors, cross-border traders and OEM/ODM partners in Belgium and 60+ destination markets. To start a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, contact the export team below. Sample orders ship within 1-3 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 12-20 days, and Strategic OEM Partner applications are reviewed quarterly.

We invite Belgium buyers, export traders and trading companies to build long-term cooperation with Wanlin Group as your China-based OEM/ODM partner, regional exclusive distributor or strategic global supplier under the AndroidSBC brand. Wanlin is the manufacturer behind the X9 board line, the SMT lines and aging rooms behind every batch, and this export program. Let's build the Advertising Machine and Digital Signage Boards supply chain together.

---

Model: X9-AV150
Platform: Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class
CPU: 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit
GPU: Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1
Render / decode: GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout
Video: Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode
Camera input: MIPI-CSI camera input for face recognition modules, QR scanners and USB industrial cameras
Memory: 1GB LPDDR4
Storage: 16GB eMMC
OS: Android 10 with GMS option, Linux (Debian 12) and Tina Linux
Display: Dual LVDS output driving two panels at 50/60 Hz with independent rotation settings
Audio: amplified stereo output with a 4-pin 2.0 mm speaker header and PH headphone jack
Network: 10M/100M adaptive Ethernet RJ45 plus WiFi with Bluetooth 5.0 and optional 3G / 4G module
Board I/O: USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button
Power: DC 12 V single-rail input, 100 mV ripple tolerance, 3.3 V / 800 mA, 5 V / 2 A and 12 V / 2 A peripheral rails
Temperature: -20 to +70 deg C, up to 80% relative humidity
PCB: 6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes
Cert: CE / FCC / RoHS / REACH
MOQ / Lead / Warranty: 100 pcs / 12-20 days / 24 months
FOB Shenzhen reference price: $55.50 per piece at MOQ 100 pcs
Region: Belgium
Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

• Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
• Manufacturer: Wanlin Group / Brand: AndroidSBC / Site: www.androidsbc.com
• Export service: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com
• Form factor: Advertising Player Boards / Platform: Allwinner A133 quad-core SoC (X9 board platform) / PCB: 6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes
• Country compliance for Belgium: CE under RED 2014/53/EU with bilingual documentation and RoHS declarations