Restaurant Table-Side Ordering Board, WF-P7601, AndroidSBC, Nantes

TL;DR: Restaurant Table-Side Ordering Board

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-P board family serving Nantes, France. The WF-P7601 POS Android motherboard spans the AI face payment POS terminal with 3D camera input and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, MIPI DSI plus HDMI output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Nantes and France importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC builds POS boards for the way retailers actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The WF-P family supports that pattern because the BOM is frozen per lot and the Nantes partner can re-order the same configuration eighteen months later and receive the same board. The AndroidSBC engineering desk keeps a reference image per silicon tier, so a France partner developing against the RK3576 board is testing against the same build that ships in volume, not a one-off sample image.

WF-P7601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7601 (AI face payment POS terminal with 3D camera input) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-P family, the WF-P7601-A variant is the typical configuration for the face payment counter deployment use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for France Buyers

The second problem is the peripheral stack. A POS board is useless if the cash drawer does not fire, if the barcode scanner needs a driver nobody has, or if the customer display shows the cashier screen instead of the promotion loop.

On the peripheral side the driver SDK ships in the carton. Receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader and card reader drivers are validated against the shipping Android build before the lot leaves Longgang, and the ANFR file that travels with the lot covers the radio modules too. AndroidSBC confirmed on September 23, 2026 that 133900 boards for Nantes were on the water via Marseille - Shanghai, with the peripheral validation report from the Longgang bench included in the packing list.

Competitive Comparison: WF-P7601 vs Competing POS Android Boards

The boards competing with the WF-P family in France tend to be single-platform designs. That is the root of three of the four differences below.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

The global POS payment terminal market was valued at about USD 123.15 billion in 2025 and is projected to reach roughly USD 215.45 billion by 2032, a compound annual growth rate near 8.25 percent, with the Asia Pacific region holding the largest share. For a Nantes integrator that growth translates into a replacement cycle rather than a one-off project, and the board has to be specified for the third refresh, not the first.

• Entry counter tier: WF-P7601 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3601 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3602 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The France market will keep absorbing Android POS boards for the rest of the decade. The question for Nantes buyers is whether the board underneath the terminal is built to be re-ordered.

Partner Success Story: Siam Counter Holdings (convenience and pharmacy POS integrator)

A recent Siam Counter Holdings deployment in the Southeast Asian retail segment shows how the WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Nantes integrators. Siam Counter Holdings rolled out 133900 WF-P boards across 210 convenience and pharmacy counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Siam Counter Holdings branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Siam Counter Holdings Chief Engineer for Southeast Asian Retail highlighted: Siam Counter Holdings moved to the WF-P family after the previous supplier changed eMMC parts mid-contract, and 133900 boards into the Nantes estate have held one frozen BOM.

Field Report: face payment counter deployment across a convenience chain

BAOLONG, September 23, 2026 - Hao Ran, AndroidSBC field desk. On the France configuration the WF-P7601 ran kiosk-mode lockdown with a single merchant app, and the watchdog recovered the lane after each simulated mains dip. The WF-P7601 POS Android motherboard order for Nantes, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-P7601 AI face payment POS terminal with 3D camera input production lot includes the WF-P7601-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Hao Ran, AndroidSBC field desk, BAOLONG. French chains ask for the NF525 fiscal certification trail and French receipt wording, and they audit the log retention behaviour during the pilot.

WF-P7601 Application Scenarios

The WF-P7601 AI face payment POS terminal with 3D camera input sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7601-A configuration is the typical build for the face payment counter deployment use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P7601 drives the cashier screen while the second lane carries the customer display or the promotion wall in Nantes.
• Convenience and small format stores: the WF-P3566 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3288 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3399 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P1330 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Nantes: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Nantes Buyers

For France importers the track choice changes the paperwork, not the board. The three options below are the standard ones.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Every track is open to Nantes importers, distributors, system integrators and brand owners, with the same 1-3 day sample lead.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support an AI face payment POS terminal with 3D camera input?

Answer: Supported. AI face payment POS terminal with 3D camera input is part of the standard WF-P configuration set, and the board ships to Nantes with the drivers and the firmware baseline already matched.

Which silicon tiers are available in the WF-P family for France buyers?

Answer: The family covers eight platforms from the RK3576 octa-core tier down to the A133 entry tier. The RK3576 board in this configuration is supported for seven years from release.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: One board handles all four. The driver SDK ships in the carton covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC, RFID, magnetic stripe, IC card, PIN pad and fingerprint reader.

What is the minimum order quantity and the sample lead time for France?

Answer: For Nantes buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.

How are firmware updates delivered to a France estate after deployment?

Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.

What shipping terms does AndroidSBC support for France orders?

Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Nantes partner books the lane that suits the import process.

What happens if a board fails in the field in France?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Nantes programme so the lane is not down for a full lead time.

Contact AndroidSBC: Start Your WF-P7601 Sourcing Conversation

For the WF-P POS Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Nantes integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to France buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.