Mall Query ID Reader Board, WF-K3288, AndroidSBC, Nantes

TL;DR: Mall Query ID Reader Board

AndroidSBC field desk: query rollout map updated across hospitals, bank branches, government halls, malls and airports serving Nantes, France. The WF-K3288 self-service query terminal Android motherboard spans the legacy query terminal refresh with hall display and eleven sister models in the WF-K series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, 1080p HDMI plus LVDS, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Nantes and France importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

As a board-level manufacturer rather than a kiosk assembler, AndroidSBC gives France buyers the WF-K self-service query terminal motherboards without the cabinetry markup. The twelve-model family is produced in Longgang, Shenzhen, under one BOM discipline, and Nantes integrators integrate it into their own enclosures and housings. Purchasing runs through the Shenzhen export desk, so Nantes buyers deal with the manufacturing entity rather than a trading layer.

WF-K3288 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3288 (legacy query terminal refresh with hall display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-K family, the WF-K3288-A variant is the typical configuration for the installed-base query terminal refresh use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for France Buyers

Buyers in Nantes often treat a self-service query terminal as a commodity board, then discover that the printer driver, the card reader stack and the kiosk-mode lockdown each need separate validation against France deployment conditions.

There is also a documentation discipline problem. Many suppliers quote ANFR for France but cannot produce the underlying CE marking with ANFR radio interface registration evidence when a Nantes integrator is audited mid-project. The factory answers with lot-level BOM control, so the Nantes order of 148200 units is the 8th in a series that never re-qualifies the peripheral stack.

Competitive Comparison: WF-K3288 vs Competing Self-Service Query Terminal Android Boards

Compared with the general query boards Nantes buyers see quoted for France, the WF-K configuration differs mainly in platform breadth and in what ships in the carton.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

Information access is being treated as infrastructure in France, and that changes what is procured. Instead of one-off kiosks, Nantes operators specify the legacy query terminal refresh with hall display as a standard unit to be repeated across a whole estate on the same firmware.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3288 and WF-K8801 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K8801 and WF-K3600 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K3600 over boards that re-spin silicon between lots.

What this means for Nantes is that the query board is no longer a disposable line item. It is the component that determines whether France deployments can be extended rather than rebuilt.

Partner Success Story: Siam InfoTerm Holdings (hospital group technology supplier)

The Siam InfoTerm Holdings rollout in the Southeast Asia healthcare segment shows how the WF-K family from AndroidSBC supports Nantes integrators. Siam InfoTerm Holdings supplied 148200 query boards to hospital outpatient information desks.

• OEM relationship: AndroidSBC private-label SKU shipped with Siam InfoTerm Holdings branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Siam InfoTerm Holdings Managing Director for Southeast Asia Healthcare: Siam InfoTerm Holdings rolled the WF-K single-screen board into outpatient information desks, and the 148200 units delivered to Nantes came with the printer and card reader drivers already integrated.

Field Report: installed-base query terminal refresh at a social security service hall

LONGGANG, Shenzhen, September 22, 2026 - Lai Feng, AndroidSBC field desk. Because France sites range from air-conditioned lobbies to unheated entrances, the WF-K3288 batch was cleared at both ends of the rated window. The WF-K3288 self-service query terminal Android motherboard order for Nantes, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-K3288 legacy query terminal refresh with hall display production lot includes the WF-K3288-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Lai Feng, AndroidSBC field desk, LONGGANG, Shenzhen. French service halls combine a touch query terminal at the entrance with a high-brightness information display in the same lobby.

WF-K3288 Application Scenarios

The WF-K3288 legacy query terminal refresh with hall display sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3288-A configuration is the typical build for the installed-base query terminal refresh use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K3288 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Nantes.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K3399 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K1330 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K1331 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K6180 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Nantes: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Nantes Buyers

Rather than a single reseller agreement, AndroidSBC offers Nantes partners three routes into the France market, each with a different level of factory involvement.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

AndroidSBC does not require exclusivity on any of the three tracks, which is deliberate: Nantes integrators working across several France verticals need room to run different models side by side.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support a legacy query terminal refresh with hall display?

Answer: Yes. The legacy query terminal refresh with hall display is covered by the standard WF-K driver SDK, which means the Nantes integrator configures it rather than ports it.

What is the real difference between the RK3288 tier and the other silicon tiers in the WF-K family?

Answer: Practically, the RK3288 tier is chosen when the France use case matches its video and AI envelope. The interface contract is identical across the family, so the decision is about workload rather than about connectors or drivers.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for France?

Answer: Yes, and the paperwork is treated as part of the product rather than an add-on. For France orders the CE, FCC, RoHS and REACH set is prepared alongside the production lot bound for Nantes.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: MOQ is quoted per model rather than per family, so a Nantes integrator can pilot one tier for France without buying across all twelve. Samples take 1-3 days and bulk lots 15-30 days.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. AndroidSBC handles AOSP customisation, kiosk-mode lockdown and Linux images for the WF-K family, with the resulting build validated on the same rig used for France shipments to Nantes.

How are software updates and long-term support handled on the WF-K family?

Answer: AndroidSBC maintains a seven-year firmware window on the WF-K family, with staged OTA and rollback. Nantes partners can freeze a revision per France project and update on their own schedule.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes, and where a Nantes seller runs its own 3PL arrangement in France, AndroidSBC ships to that warehouse on the same terms as a direct buyer order.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: AndroidSBC handles RMA and DOA replacements per production lot, which means a Nantes partner can trace a failure back to a specific build shipped to France rather than dealing with an anonymous board.

Contact AndroidSBC: Start Your WF-K3288 Sourcing Conversation

Nantes integrators can reach the AndroidSBC export desk for the WF-K self-service query terminal family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to France buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-K family.