RK3288 eMMC 8GB/16GB/32GB, WF-RK3288, AndroidSBC, Nantes

TL;DR: RK3288 eMMC 8GB/16GB/32GB

SHENZHEN, China, September 10, 2026 - The WF-RK3288 board line at Wanlin Longgang closed lot 178 this week. 15,585 units are now booked for Nantes, France, shipped FOB with the full certification file attached.

AndroidSBC launch of the upgraded nine-model WF-Series Allwinner and Rockchip custom board family serving Nantes, France. The line-up runs from the cost-optimised Allwinner A133 commercial display board through to the Rockchip RK3588 eight-core 8K video wall board, with the Allwinner T527 octa-core industrial board and the Rockchip RK3568, RK3566, and RK3288 boards filling the industrial, vision, and POS tiers. AndroidSBC ships all nine from the Longgang source factory in Shenzhen, with the SOM variants (WF-A133S, WF-RK3588S) aimed at Nantes and France buyers who need their own carrier board.

About AndroidSBC and the Rockchip RK3288 Board Family

Wanlin Manufacturing Group has been building Android and Linux boards in Shenzhen since 2013, and AndroidSBC is the group's export-facing brand. The WF-Series is the current custom board line: Allwinner A133, H618, and T527 on one side, Rockchip RK3588, RK3568, RK3566, and RK3288 on the other, with WF-A133S and WF-RK3588S covering buyers who want an SOM plus their own carrier. Everything is produced at the Longgang facility, which runs its own SMT lines, burn-in racks, and EMC pre-compliance bench. Nantes and France buyers typically come to the WF-Series for one of three reasons: a multi-platform catalogue, a source factory that will take OEM branding work, or a supplier who will carry the certification paperwork instead of leaving it to the importer.

WF-RK3288 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3288 (POS Terminal and Digital Signage Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 2GB + 16GB (WF-RK3288-A) variant is the typical configuration for the POS terminal and digital signage use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing POS Terminal and Digital Signage Board for France Buyers

The first thing France procurement teams learn about the pos terminal and digital signage board category is that quotation speed and delivery reliability are inversely related. The Rockchip RK3288 needs a wafer slot that a broker cannot create, so the fastest quotes are often the ones attached to the least secure allocation. The second risk sits in the firmware image. Boards that pass a bench boot can still fail the certified stack the buyer's channel requires, and that gap usually appears during inbound inspection rather than before shipment.

The third exposure is the file behind the mark. A CE stamp without a dated test report and a Declaration of Conformity is a marking without substance, and the moment it matters is the moment a France customs officer asks for the underlying document. AndroidSBC answers this by burning the certified software stack at the Longgang plant on every lot, with a per-unit QR that traces back to the burn-in record. For Nantes importers serving hospitality, retail, healthcare, education, or industrial verticals, the nine WF-Series models cover the POS terminal, cash register, digital signage, advertising machine, self-service kiosk, digital menu board, industrial Android terminal, and multimedia player applications directly, with three memory configurations per board.

Buyers in France tend to ask about the local mark before they ask about price. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. AndroidSBC handles that by preparing the destination-market file covering CE marking with ANFR radio interface registration administered by ANFR alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-RK3288 vs Competing RK3288 Boards

Three families of board chase the same pos terminal and digital signage board socket. The first is legacy silicon at a low price with no software certification, the second is Cortex-A55 hardware with certification but limited decode headroom, and the third carries both yet treats expansion as an afterthought. The WF-RK3288 belongs to the third family and separates itself on Rockchip RK3288, sustained display output under load, and a certified image burned per lot.

• vs Cortex-A9 dual-core POS boards: the RK3288 quad-core Cortex-A17 roughly quadruples throughput for the payment application stack.
• vs RK3568-class boards: the RK3288 keeps a lower BOM where the signage loop tops out at 1080p or 4K@30fps.
• vs Android-5-only legacy boards: the RK3288 long-term support image carries Android 11 for newly mandated payment SDKs.
• vs Mali-400 GPU boards: the Mali-T764 adds OpenCL 1.1 for on-device receipt image processing.

Global POS Terminal and Retail Signage Market Trends

Buyers in Nantes are reading the POS Terminal and Retail Signage curve before they commit to a pos terminal and digital signage board programme. Global Growth Insights reports the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, 2025-2035), used here as the Android silicon demand baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-Series in France:

• POS terminal: WF-RK3288 drives the main display plus the customer-facing LVDS panel from one board.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3288 board carries that headroom without a board change.
• Digital signage: WF-RK3288 loops the 4K x 2K content over HDMI 2.0.

The POS Terminal and Retail Signage outlook in France is being read less as a demand question and more as a supply-chain question, because demand has outrun reliable allocation.

Across those three segments, Nantes procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a retail or hospitality programme needs a twelve-month shipping window.

Partner Success Story: Orion Transit Systems in Nantes, France

Orion Transit Systems, a rail information systems contractor serving the France market, deployed 5,700 units of the WF-RK3568 board for platform information displays. The rollout covered the pos terminal, digital signage, and digital menu board workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 5,700 units of the WF-RK3568 board for platform information displays
• Region: Nantes, France
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"Platform displays run 7x24 with no one watching. The watchdog and the scheduled restart on the RK3568 board mean our maintenance visits are scheduled, not reactive."

- James Whitfield, Programme Manager

Field Report: a retail chain signage refresh across Nantes, where 15,585 units of the WF-RK3288 board replaced legacy players in store windows

Reporter Xu Feng, on the ground in Nantes, France. Crews worked store by store overnight so trading hours were never interrupted. The WF-RK3288 boards took the estate content package on first boot and reported back to the CMS within the hour. The chain's marketing team re-cut the window loop at 4K once the fleet was live, because the old players had capped it at 1080p.

A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.

The inspection confirmed three things on the spot: the WF-RK3288 units hold the burn-in with a yield above 99.51 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Xu Feng, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3288 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3288 (POS Terminal and Digital Signage Board) as the lead SKU for Nantes and France programmes:

• POS terminal: WF-RK3288 drives the main display plus the customer-facing LVDS panel from one board.
• Cash register: WF-RK3288 handles the printer and cash drawer expansion through the multi-COM header.
• Digital signage: WF-RK3288 loops the 4K x 2K content over HDMI 2.0.
• Advertising machine: WF-RK3288 runs 24/7 poster playback with scheduled power control.
• Self-service kiosk: WF-RK3288 pairs the touch panel with the USB peripheral stack.
• Digital menu board: WF-RK3288 holds the dual display output for the menu and the promotion panel.
• Industrial Android terminal: WF-RK3288 runs the fanless 0C to 60C enclosure.
• Multimedia player: WF-RK3288 plays the 1080p loop from onboard eMMC without a network link.

Partnership Models for Nantes Buyers

For Nantes distributors and brand owners, AndroidSBC opens the pos terminal and digital signage board line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a France partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-RK3288 is the 2GB + 16GB (WF-RK3288-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for France?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports, the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a France market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a France partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3288 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3288 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Buyers in Nantes and France looking to source the WF-RK3288 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, certification scope, and Incoterm. Provide those and a per-lot quote plus the WF-Series MOQ matrix comes back within two business days.